About Throttlestop 8.70
> recovery > reset this pc > wipe everythingNext time it was from advanced startup > troubleshoot > reset this pc > remove everythingAnother time was from advanced startup and then using the burn recovery tool.Last time was from advanced startup and then using the burn recovery tool as well. However, I noticed that windows version was 1903? Pretty sure it wasn't the same as daynumber one. (Don't know about the previous resets.)*BIOS / FIRMWARE: I have downloaded the official correct version BIOS update from the site(After the last reset). What was strange is that my BIOS was from 2019 / 9? and the current version is from 2020/5 and both version numbers look the same; nothing changed nor broke. Since it was the same version with the EC FIRMWARE, i left it be.*Assembly/Disassembly: Haven't done anything, i am waiting for the thermal paste arrival (Soon.. after 2 months..)*Software:XTU always was the latest version. Throttlestop was 8.70 (Or something really close to 8.70) but after the last windows reset it was 9.0. no -- EC FW --MSI/intel OEM configuration Deleted member 663924 Guest #8 125A on this CPU is LOW --but your temperatures is bad --not raise some need + loadline setup --only get power off on loadedit+ remove 50W your limit -- Throttlestop or similar app,,remove all + reload bios to defauts #9 9750 - 100W or more "no power limit"-- loadline 1.8micro.ohm or 0.1 // 138 A max iccmax or is bios VR setting is Current/EDP Limit THROTTLINGpower limit -- PL1 - PL2 --in bios power + PL overdrive "PL3-4"there is no point in increasing -- get overheat Sorry but what do you mean by that?EC FW:The current one i have is from 2019 and the version number is the same from 2020 ([font=DINPro-Regular Arial Verdana Geneva ????? sans-serif sans-serif]16W1EMS1.103)[/font]Should i update it although the numbers are the same?-I removed the 50w limit, already did BIOS settings to default (pressed it many times).-I kept the undervolt at -0.145 mV -I removed the offset overclock from DCWhat is loadline setup? I haven't seen it in BIOSAnd how to use
Key features of the Throttlestop 8.70 that are enabled through these drivers include:
- ThrottleStop 8.70 released - Geeks3D
- ThrottleStop 8.70 vs ThrottleStop 9.3 - Album on Imgur
- Downloading ThrottleStop 8.70 from FileHorse.com
- TechPowerUp ver ffentlicht ThrottleStop 8.70
- Descargar ThrottleStop 8.70 de FileHorse.com
- ThrottleStop 8.70 / 8.48 obsidian pc - TaiMienPhi.VN
- ThrottleStop 8.70 - monitor and correct CPU throttling
+ offset -- normal works similar like your CPU --all time power limit --not full speedold games get overheat ,,new run on power limit not use dragon center ,,,,dc reload some setting CPU + GPUany custom need ideal remove DC ..translator #6 chc date=1593410338 said: How did you reinstall Windows system? Using the MSI brunrecovery tool? F3? Or install Windows 10 from scratch? If you did not change anything on the BIOS/Firmware, and use the same tweaks with Intel XTU or other software, then Windows 10 system is an item to dig out the cause of the issue since HW is unlikely to be affected, unless chassis disassembly/assembly was done recently.Also the software you installed on the system are the same you have for the previous Windows system? -So the Power + Current/EDP limits are caused by windows?*Windows:Time ago my first windows reset was doing it from the settings > recovery > reset this pc > wipe everythingNext time it was from advanced startup > troubleshoot > reset this pc > remove everythingAnother time was from advanced startup and then using the burn recovery tool.Last time was from advanced startup and then using the burn recovery tool as well. However, I noticed that windows version was 1903? Pretty sure it wasn't the same as daynumber one. (Don't know about the previous resets.)*BIOS / FIRMWARE: I have downloaded the official correct version BIOS update from the site(After the last reset). What was strange is that my BIOS was from 2019 / 9? and the current version is from 2020/5 and both version numbers look the same; nothing changed nor broke. Since it was the same version with the EC FIRMWARE, i left it be.*Assembly/Disassembly: Haven't done anything, i am waiting for the thermal paste arrival (Soon.. after 2 months..)*Software:XTU always was the latest version. Throttlestop was 8.70 (Or something really close to 8.70) but after the last windows reset it was 9.0. Deleted member 663924 Guest #7 FresHMeaT_0207 date=1593416458 said: -So the Power + Current/EDP limits are caused by windows?*Windows:Time ago my first windows reset was doing it from the settings
